Oh my......what have I gone and done?

[Jack Jeter]

My newest toy. I bought two of these babies. One in the attachment is up and running and the other one needs to be assembled.
Just for the record.............I haven't been on a moto cross bike in 30 years!

[Jack Jeter]

Ok.....got both bikes in yesterday. If you ever have to go to Forward Air to pick up any kind of freight,don't plan on anyone that works there to lift a finger to help you.
I can see now that there's probably no way I can have the 440 ready for the June race,but it will be ready as fast as possible.
One more question.........do I, or how do I join the TVRC?

[Craig Knight]

Jack, here's a link for TVRC membership:

http://www.tvrc.org/TVRC%20Forms/TVRC%20APPLICATION.htm

I've been through my 440 upside-down and backwards, at least 3 times. not saying I'm an expert, but I'd be happy to answer questions and help, if I can. check your "inbox" for my telephone #'s.

[Jack Jeter]

Spokes...........I need new spokes for the front wheel on the 440. Where's the best place to get them?

[Jack Jeter]

You're probably gonna be sorry you offered your help........I got about a million questions!

Craig Knight said:

Jack, here's a link for TVRC membership:

http://www.tvrc.org/TVRC%20Forms/TVRC%20APPLICATION.htm

I've been through my 440 upside-down and backwards, at least 3 times. not saying I'm an expert, but I'd be happy to answer questions and help, if I can. check your "inbox" for my telephone #'s.

[Joe Edwards]

Jack, I would suggest you get the front wheel off of Craig's bike, it looks reasonably good..............Not sure about the Maico crew, but I have used Buchanan with good luck.............http://www.buchananspokes.net/

[Jack Jeter]

Will I need my ACP 45 to get that wheel in my possession?J/K you know,and thank's for the link.

Joe Edwards said:

Jack, I would suggest you get the front wheel off of Craig's bike, it looks reasonably good..............Not sure about the Maico crew, but I have used Buchanan with good luck.............http://www.buchananspokes.net/

[Jack Jeter]

APB................APB. Does anyone have a bearing puller to remove some swingarm bearings that look like they have been in the same damn swingarm for 32 years? As soon as I get the swingarm bearings out,she's headed for the powder coaters.

[John Woolley]

Way to go Jack!

[Paul Burnett]

Jack, if it's not too late, I have inside bearing pullers, wither 3 jaw or expanding mandrel type. Cell 214-232-0685

[Jack Jeter]

Thanks Paul,but I already have them out.

Paul Burnett said:

Jack, if it's not too late, I have inside bearing pullers, wither 3 jaw or expanding mandrel type. Cell 214-232-0685

[Jack Jeter]

Ok.........who's the Maico seat repair king around here? I have everything I need for a new seat,but I'm not real sure about how to get this thing put together to where it looks original. Any help would be greatly appreciated............I'll supply the adult beverages!